Skip to content
EHD Fasteners (#15)

EHD Fasteners (#15)

EHD Fastener (#15) is engineered for lap attachment to corrugated steel (18 – 22 ga.) and wood substrates in higher wind uplift roof assemblies. Featuring a #2 double flute self-drilling point and exclusive tapered entry thread design, penetrating steel quickly and offering exceptional back-out resistance.

System

EPDM
TPO
PVC
ModBit
  • #15 Extra Heavy-Duty Drill Point Fastener with buttress threads
  • May be used for membrane attachment in system warranties when greater pull strength is needed
  • A membrane fastener that can be used for attaching insulation in combination with a 3" Stress Plate
  • Must be paired with 2.4" Seam Plate when fastening membrane
  • Available in #3 Phillips head (one bit per container)
  • Not recommended for concrete, use a #14 HDP Fastener instead
  • Meets UL Standards
  • Meets FM Standards
  • Meets Miami-Dade-County Standards
  • Meets ICC-ES Standards

Documents

PDS EHD Fasteners-15
View
SDS - Statement for Article Products
View

Single-Ply Roofing Accessories Guide
View
Tech Bulletin Guidelines for Fastener Pull Tests
View

Details

6 inch RMS ATTACHMENT STRIP
6 inch RMS WITH TAPE
BASE ATTACHMENT - FLEECE BACK
BASE ATTACHMENT PVC - ALL-PURPOSE BAR
BASE ATTACHMENT TPO- ALL -PURPOSE BAR
BASE ATTACHMENT USING 6 inch STANDARD TPO-C MEMBRANE
BASE ATTACHMENT USING 9 inch INVERTED FLEECE BACK
BASE ATTACHMENT WITH 6 inch RUSS
BASE ATTACHMENT WITH PLATES AND FASTENERS
DOOR THRESHOLD FLASHING
PARAPET FLASHING FOR PVC
PARAPET/CURB FLASHING A-P BAR HORIZONTAL ATTACHMENT W/6 inch IN-SEAM TAPE
PARAPET/CURB FLASHING A-P BAR HORIZONTAL ATTACHMENT W/ADHESIVE
PARAPET/CURB FLASHING A-P BAR HORIZONTAL ATTACHMENT W/COVER TAPE
PARAPET/CURB FLASHING A-P BAR VERTICAL ATTACHMENT W/3 inch IN-SEAM TAPE
PARAPET/CURB FLASHING A-P BAR VERTICAL ATTACHMENT W/6 inch IN-SEAM TAPE
PARAPET/CURB FLASHING A-P BAR VERTICAL ATTACHMENT W/ADHESIVE
PARAPET/CURB FLASHING A-P BAR VERTICAL ATTACHMENT W/COVER TAPE
PARAPET/CURB FLASHING BAR HORIZONTAL ATTACHMENT W/3 inch IN-SEAM TAPE
PARAPET/CURB FLASHING RMS W/TAPE - HORIZONTAL
PARAPET/CURB FLASHING RMS W/TAPE - HORIZONTAL
PARAPET/CURB FLASHING RMS W/TAPE - VERTICAL
PARAPET/CURB FLASHING W/2.4 inch SEAM PLATES - HORIZONTAL - ADHESIVE
PARAPET/CURB FLASHING W/2.4 inch SEAM PLATES - HORIZONTAL - W/3 inch IN-SEAM TAPE
PARAPET/CURB FLASHING W/2.4 inch SEAM PLATES - HORIZONTAL - W/6 inch IN-SEAM TAPE
PARAPET/CURB FLASHING W/2.4 inch SEAM PLATES - HORIZONTAL - W/COVER TAPE
PARAPET/CURB W/2.4 inch SEAM PLATES / VERTICAL ATTACHMENT W/3 inch IN-SEAM TAPE
PARAPET/CURB W/2.4 inch SEAM PLATES / VERTICAL ATTACHMENT W/6 inch IN-SEAM TAPE
PARAPET/CURB W/2.4 inch SEAM PLATES / VERTICAL ATTACHMENT W/ADHESIVE
PARAPET/CURB W/2.4 inch SEAM PLATES / VERTICAL ATTACHMENT W/COVER TAPE

FIELD FABRICATED INSIDE CORNER FOR PVC
FIELD FABRICATED INSIDE CORNER FOR TPO
FIELD FABRICATED OUTSIDE CORNER FOR PVC
FIELD FABRICATED OUTSIDE CORNER FOR TPO
INSIDE CORNER FOR TPO
INSIDE CORNER USING RUSS FOR TPO
INSIDE CORNER WITH COATED METAL WALL FLASHING FOR PVC
INSIDE CORNER WITH CONTINUOUS EPDM WALL FLASHING - 90 MIL EPDM
View
INSIDE CORNER WITH SEPARATE EPDM WALL FLASHING - 90 MIL EPDM
View
PRE-MOLDED INSIDE CORNER FLASHING FOR PVC
PRE-MOLDED OUTSIDE CORNER FOR PVC
PRE-MOLDED OUTSIDE CORNER ON COATED METAL WALL FLASHING FOR PVC
TPO UNIVERSAL CORNER - OUTSIDE CORNER

BASE FLASHING - AREA DIVIDER MODBIT OPTION 2
BASE FLASHING - MODBIT OPTION 1
BASE FLASHING - MODBIT OPTION 9
BASE FLASHING - OPTION 1
BASE FLASHING - OPTION 10
BASE FLASHING - OPTION 2
BASE FLASHING - OPTION 3
BASE FLASHING - OPTION 4
BASE FLASHING - OPTION 5
BASE FLASHING - OPTION 6
BASE FLASHING - OPTION 7
BASE FLASHING - OPTION 8
BASE FLASHING - OPTION 9
BASE FLASHING FOR VENTED PERIMETER FOR MODBIT
BASE FLASHING W/CANT - MODBIT OPTION 3
BASE FLASHING W/CANT - OPTION 3
BASE FLASHING WITH METAL COUNTERFLASHING FOR MODBIT
CURB FLASHING - 90 MIL EPDM
View
CURB FLASHING FOR PVC
CURB FLASHING FOR TPO
CURB FLASHING WITH M-H ALL-PURPOSE BAR
CURB/WALL FLASHING WITH M-H ALL-PURPOSE BAR - FLEECE BACK & SELF-ADHERING TPO
CURB/WALL FLASHING WITH M-H ALL-PURPOSE BAR FOR TPO
DRAIN FLASHING WITH TARGET - FLEECE BACK
DRAIN FLASHING WITH TARGET - FLEECE BACK AND SELF-ADHERING TPO
HIGH WALL PARAPET FLASHING FOR MODBIT
View
INSULATED PARAPET WALL WITH METAL COPING CAP FOR TPO
PARAPET WALL DETAIL - EXISTING COPING CAP FOR TPO
PARAPET WALL DETAIL - METAL COPING CAP FOR TPO
PARAPET/CURB FLASHING FOR EPDM
PARAPET/CURB WITH SEPARATE EPDM MEMBRANE - 90 MIL EPDM
View
PVC COATED GRAVEL STOP FOR FLEECE BACK
PVC COATED WALL FLASHING
SLEEPER FOR EPDM
WELDED CURB FLASHING
WELDED CURB FLASHING - ALL PURPOSE BAR TERMINATION FOR EPDM
WELDED CURB FLASHING - AP BAR TERMINATION
WELDED CURB FLASHING - HIGH CURB FOR EPDM
WELDED CURB FLASHING FOR EPDM
WELDED CURB OVER FIELD MEMBRANE WITH CURED OR UNCURED FLASHING TAPE
WELDED CURB OVER FIELD MEMBRANE WITH SEAM TAPE
WELDED CURB OVER FIELD MEMBRANE WITH SEAM TAPE FOR EPDM
WOOD CURB OVER FIELD MEMBARNE WITH SEAM TAPE
WOOD CURB WITH ALL PURPOSE BAR AND SEAM TAPE
WOOD CURB WITH ALL PURPOSE BAR AND SEAM TAPE FOR EPDM

DRAIN FLASHING WITH TARGET PATCH FOR TPO
DRAIN INSERT FOR EPDM
DUTCH GUTTER FOR EPDM AND TPO
FLANGED GUTTER WITHOUT DRIP EDGE
GRAVEL STOP SCUPPER - TPO COATED METAL
GUTTER DETAIL - MOD BIT OPTION 1
GUTTER DETAIL -MOD BIT OPTION 2
GUTTER WITH DRIP EDGE FOR MOD BIT - OPTION 2
INTERMITTENT WALL SCUPPER FOR EPDM
MECHANICALLY FASTENED TARGET ROOF DRAIN FOR PVC
NEW METAL THROUGH-WALL SCUPPER WITH WHITE UNCURED EPDM FOR TPO
RETROFIT DRAIN INSERT - COMPRESSION TYPE INSERT FOR TPO
ROOF DRAIN FOR EPDM AND TPO
THROUGH-WALL SCUPPER - TPO COATED METAL
THROUGH-WALL SCUPPER - TPO COATED METAL

12 inch SELF-BRIDGING MATE-LINE
DECK TO WALL JOINT - A - RMS STRIP - ADHESIVE
EXPANSION JOINT - CURB FOR TPO
EXPANSION JOINT - DECK TO WALL JOINT
EXPANSION JOINT - DECK TO WALL JOINT - A FOR EPDM
EXPANSION JOINT - DECK TO WALL JOINT - C - ADHESIVE FOR EPDM
EXPANSION JOINT - DECK TO WALL JOINT - C - IN-SEAM TAPE FOR EPDM
EXPANSION JOINT - EXISTING FIELD JOINT - A FOR EPDM
EXPANSION JOINT - EXISTING FIELD JOINT - B FOR EPDM
EXPANSION JOINT - EXISTING FIELD JOINT "A"
EXPANSION JOINT - EXISTING FIELD JOINT "B"
EXPANSION JOINT - FIELD JOINT
EXPANSION JOINT - FIELD JOINT - RMS
EXPANSION JOINT - FIELD JOINT - RMS FOR EPDM
EXPANSION JOINT - FIELD JOINT FOR EPDM
EXPANSION JOINT CURB WITH CLOSED CELL ROD
EXPANSION JOINT CURB/FIREWALL - ADHESIVE
EXPANSION JOINT CURB/FIREWALL - IN-SEAM TAPE
EXPANSION JOINT DETAIL
EXPANSION JOINT DETAILS
WALL EXPANSION JOINT
WALL EXPANSION JOINT

CORNER FOLD DETAIL FOR EPDM
NAIL BASE FASTENING PATTERN FM 1-60
NAIL BASE FASTENING PATTERN FM 1-90

2 inch OR THICKER INSULATION ATTACHMENT - 8 FASTENERS PER 4ft X 8ft BOARD
Extruded Polystyrene Insulation Attachment Fastening Patterns
FM - 12 FIELD FASTENERS PER 4ft X 8ft BOARD PATTERN LAYOUT
FM - 16 FIELD FASTENERS PER 4ft X 8ft BOARD PATTERN LAYOUT
FM - 17 FIELD FASTENERS PER 4ft X 8ft BOARD PATTERN LAYOUT
FM - 8 FIELD FASTENERS PER 4ft X 8ft BOARD PATTERN LAYOUT
INSULATION ATTACHMENT - 12 FASTENERS PER 4ft X 8ft IN FIELD
INSULATION ATTACHMENT - 16 FASTENERS PER 4ft X 8ft IN FIELD
INSULATION ATTACHMENT - 17 FASTENERS PER 4ft X 8ft IN FIELD
INSULATION ATTACHMENT PATTERNS FOR MECHANICALLY ATTACHED SYSTEMS
INSULATION ATTACHMENT WITH MODBIT - 16 FIELD FASTENERS PER 4FT X 8FT BOARD - OPTION 1
INSULATION ATTACHMENT WITH MODBIT - 17 FIELD FASTENERS PER 4FT X 8FT BOARD- OPTION 5
INSULATION ATTACHMENT WITH MODBIT - 24 FIELD FASTENERS PER 4FT X 8FT BOARD - OPTION 3
INSULATION ATTACHMENT WITH MODBIT - 28 FIELD FASTENERS PER 4FT X 8FT BOARD - OPTION 4
INSULATION ATTACHMENT WITH MODBIT - 8 FIELD FASTENERS PER 4FT X 8FT BOARD - OPTION 2

FIELD MEMBRANE LAYOUT FOR PVC
FM CORNER/PERIMETER FASTENING ENHANCEMENTS - TPO OPTION A
FM CORNER/PERIMETER FASTENING ENHANCEMENTS - TPO OPTION B
MEMBRANE SECUREMENT FOR PVC
PERIMETER ATTACHMENT - OPTION 1 - PERIMETER HALF SHEETS FOR TPO
PERIMETER ATTACHMENT - OPTION 2 - 10 inch RUSS STRIP ALTERNATE FOR TPO
PERIMETER ATTACHMENT FOR PVC
PERIMETER ENHANCEMENT FULL SHEET WITH 9 inch RMS FOR EPDM
PERIMETER SECUREMENT - 10 inch RUSS STRIP FOR EPDM
PERIMETER SHEET ATTACHMENT FOR EPDM
SHEET LAYOUT ON BUILDINGS WITH LARGE OPENINGS FOR TPO
SHEET LAYOUT ON BUILDINGS WITH OVERHANGS FOR TPO

FIELD FABRICATED HOT STACK - 90 MIL EPDM
View
FIELD FABRICATED PIPE FLASHING WITH BANDING CLAMP FOR TPO
FIELD FABRICATED PIPE FLASHING WITH SEAM TAPE FOR TPO
HOT PIPE FLASHING WITH COLD SLEEVE FOR TPO
I-BEAM SUPPORT FLASHING FOR TPO
MEMBRANE COATED METAL PITCH PAN FOR PVC
MULTIPLE PIPE PENETRATION FOR TPO
PITCH PAN MEMBRANE COATED METAL FOR TPO
PREFABRICATED SQUARE TUBING WRAP FOR PVC
PREFABRICATED SQUARE TUBING WRAP FOR TPO
PREMOLDED EPDM PIPE BOOT WITH TAPE - MECHANICALLY ATTACHED
PRE-MOLDED PIPE BOOT FOR TPO
TPO MOLDED SEALANT POCKET
TPO SPLIT PIPE BOOT

ALL PURPOSE BAR TERMINATION - 90 MIL EPDM
View
ALL PURPOSE BAR TERMINATION for EPDM
ALL PURPOSE BAR TERMINATION WITH FASCIA BOARD
ALL PURPOSE BAR TERMINATION Z-CLIP CAP
ALL PURPOSE BAR TERMINATION Z-CLIP CAP W/VINYL SIDING
ALL-PURPOSE BAR - EDGE TERMINATION FOR TPO
ALL-PURPOSE BAR EDGE TERMINATION FOR PVC
ANCHOR-TITE FASCIA SYSTEM BY METAL-ERA, INC
BALLASTED RETAINER BAR FOR EPDM
Batten Bar with Cover Strip
DRIP APRON / GUTTER TERMINATION EPDM
DRIP APRON TERMINATION FOR EPDM
DRIP EDGE - 90 MIL EPDM
View
DRIP EDGE - MOD BIT OPTION 2
DRIP EDGE - TPO PS COVER STRIP
DRIP EDGE - WHITE EPDM CURED COVER TAPE FOR TPO
DRIP EDGE AT MANSARD FOR EPDM
DRIP EDGE FOR ALL PVC SYSTEMS
DRIP EDGE FOR PVC
DRIP EDGE TPO COATED METAL
EDGE METAL FLASHING - MOD BIT OPTION 1
EDGE METAL FLASHING - MOD BIT OPTION 2
EDGE METAL FLASHING - MOD BIT OPTION 3
EDGE METAL FLASHING - MOD BIT OPTION 4
EDGE TERMINATION - ALL-PURPOSE BAR FOR EPDM
EDGE TERMINATION - ALL-PURPOSE BAR FOR PVC
EDGE TERMINATION BAR WITH COVER FOR EPDM
EDGE TERMINATION BAR WITH COVER FOR EPDM - OPTION 2
EDGE TERMINATION J-CHANNEL FOR EPDM
EDGE TERMINATION J-CHANNEL FOR EPDM - OPTION 2
FASCIA / DRIP EDGE SYSTEM FOR TPO
GRAVEL STOP - MODBIT OPTION 1
GRAVEL STOP - MODBIT OPTION 2
GRAVEL STOP - MODBIT OPTION 3
GRAVEL STOP - TPO COATED METAL - OPTION 1
GRAVEL STOP - TPO COATED METAL - OPTION 2
GRAVEL STOP JOINT DETAIL - TPO COATED METAL
GRAVEL STOP TERMINATION FOR EPDM
GRAVEL STOP WITH SCUPPER FOR EPDM
GRAVEL STOP WITH SNAP LOCK FASCIA FOR EPDM
GUTTER / TERMINATION BAR - RECOVER FOR TPO
GUTTER / TERMINATION BAR - RECOVER FOR TPO
GUTTER DRIP EDGE - TPO COATED METAL
GUTTER TERMINATION FOR FLEECE BACK PVC
GUTTER TERMINATION FOR PVC
GUTTER WITH METAL FASCIA AND ALL PURPOSE BAR FOR EPDM
J-CHANNEL TERMINATION WITH FASCIA BOARD FOR EPDM - OPTION 1
J-CHANNEL TERMINATION WITH FASCIA BOARD FOR EPDM - OPTION 2
MEMBRANE COATED GRAVEL STOP FOR PVC
METAL ERA ANCHOR-TITE EDGE DETAIL - 90 MIL EPDM
View
METAL RETROFIT - MEMBRANE COATED DRIP EDGE WITH GUTTER FOR TPO
PERIMETER EDGE WITH FASCIA BOARD FOR EPDM
PREMANUFACTURED 2-PIECE COMPRESSION LARGE EDGE DETAIL FOR EPDM - OPTION 2
PREMANUFACTURED 2-PIECE COMPRESSION LARGE EDGE DETAIL FOR TPO
PREMANUFACTURED ARCHED DRIP EDGE W/SPLICE CLEAT FOR EPDM
PREMANUFACTURED ARCHED DRIP EDGE WITH SPLICE CLIP FOR TPO
PREMANUFACTURED MEMBRANE COATED METAL PITCH PAN FOR TPO
PVC COATED GRAVEL STOP
SNAP-ON FASCIA FOR TPO
TAPERED EDGE / GRAVEL STOP FOR TPO
WOOD NAILER ATTACHMENT FOR PVC

FIELD SEAM - PLATE POSITION FOR TPO
FIELD SEAM ATTACHMENT
LAP CROSS SECTION FOR PVC - OPTION 2
MEMBRANE SPLICE ALL-PURPOSE BAR WITH ADHESIVE - 7 inch SEAM
MEMBRANE SPLICE, AP BAR OR 2.4" SEAM PLATE WITH 6" IN-SEAM TAPE
View
PLATE AND FASTENER PLACEMENT FOR PVC
VERTICAL TERMINATION - 90 MIL EPDM
View
WALL FLASHING WITH CONTINUOUS MEMBRANE - 90 MIL EPDM
View

BASE FLASHING AT SIDING FOR TPO
CONCRETE PARAPET WALL WITH TERMINATION BAR FOR PVC
CURB/WALL FLASHING WITH COUNTERFLASHING FOR PVC
CURB/WALL FLASHING WITH COUNTERFLASHING FOR TPO
CURB/WALL FLASHING WITH M-H ALL-PURPOSE BAR FOR PVC
PREMANUFACTURED ARCHED COPING WITH SPLICE PLATE
PREMANUFACTURED METAL EDGE EXTENDER
PREMANUFACTURED REGLET COUNTERFLASHING
PREMANUFACTURED SURFACE MOUNTED COUNTERFLASHING
SURFACE MOUNTED COUNTERFLASHING FOR PVC
TERMINATION BAR AT CORNER FOR PVC
TERMINATION BAR AT TILT-UP WALL JOINT FOR PVC
TERMINATION ELEVATION CHANGE FOR PVC
VERTICAL TERMINATION COUNTERFLASHING W/A-P BAR FOR EPDM
VERTICAL TERMINATION METAL COPING FOR EPDM
WALL FLASHING TERMINATION FOR MODBIT - OPTION 1
WALL FLASHING TERMINATION FOR MODBIT - OPTION 2
WALL FLASHING TERMINATION FOR MODBIT - OPTION 3
WALL FLASHING TERMINATION FOR MODBIT - OPTION 4
WALL FLASHING TERMINATION FOR MODBIT - OPTION 5
WALL FLASHING WITH COUNTERFLASHING FOR TPO

EPDM BASE TIE-IN TO SHINGLE ROOF ALL PURPOSE BAR ATTACHMENT FOR EPDM
EPDM BASE TIE-IN TO SHINGLE ROOF W/RMS ATTACHMENT FOR EPDM
EPDM BASE TIE-IN TO SHINGLE ROOF W/RMS ATTACHMENT FOR EPDM - OPTION 2
EPDM TIE-IN TO BUILT-UP ROOF - WATERSTOP - ADHESIVE
EPDM TIE-IN TO BUILT-UP ROOF - WATERSTOP - IN-SEAM TAPE
TIE-IN - EXISTING BUR OR MOD BIT
TIE-IN - SHINGLE ROOF - 6 inch RUSS FOR TPO
TIE-IN - SHINGLE ROOF FOR TPO
TIE-IN TO EXISTING BUR / MOD BIT ROOF - RECOVER SITUATION FOR TPO
TIE-IN TO EXISTING EPDM OR HYPALON - TEAR-OFF SITUATION FOR TPO
TIE-IN TO SOLID DECK WITH CURB - CURB PARALLEL TO SLOPE WITH TEAR-OFF FOR TPO

RIDGE ATTACHMENT WITH RMS FOR EPDM
RIDGE FLASHING FOR TPO
RIDGE MEMBRANE ATTACHMENT FOR PVC
RIDGE SHEET LAYOUT FOR TPO
VALLEY FLASHING - 6 inch RUSS FOR TPO - OPTION 2
VALLEY FLASHING 6 inch RUSS FOR TPO - OPTION 1
VALLEY FLASHING FOR TPO - OPTION 1
VALLEY FLASHING FOR TPO - OPTION 2

Specifications

Single-Ply Insulation Attachment Guidelines
View

Options

Item ID Description Packaging Qty per Ctn Weight per Ctn Cover Rate
08MHXH102 MH 10" EHD FASTENER (#15) 250/CTN Plastic Pail 250 23
08MHXH112 MH 11" EHD FASTENER (#15) 250/CTN Plastic Pail 250 25
08MHXH114 MH 1-1/4" EHD FASTENER (#15) 1000/CTN Plastic Pail 1000 14
08MHXH122 MH 12" EHD FASTENER (#15) 250/CTN Plastic Pail 250 29
08MHXH14 MH 14" EHD FASTENER (#15) 250/CTN Plastic Pail 250 33
08MHXH16 MH 16" EHD FASTENER (#15) 250/CTN Plastic Pail 250 38
08MHXH18 MH 18" EHD FASTENER (#15) 250/CTN Plastic Pail 250 43
08MHXH2 MH 2" EHD FASTENER (#15) 1000/CTN Plastic Pail 1000 21
08MHXH20 MH 20" EHD FASTENER (#15) 250/CTN Plastic Pail 250 47
08MHXH22 MH 22" EHD FASTENER (#15) 250/CTN Plastic Pail 250 52
08MHXH24 MH 24" EHD FASTENER (#15) 250/CTN Plastic Pail 250 56
08MHXH3 MH 3" EHD FASTENER (#15) 1000/CTN Plastic Pail 1000 29
08MHXH4 MH 4" EHD FASTENER (#15) 1000/CTN Plastic Pail 1000 38
08MHXH5 MH 5" EHD FASTENER (#15) 1000/CTN Plastic Pail 1000 46
08MHXH6 MH 6" EHD FASTENER (#15) 500/CTN Plastic Pail 500 28
08MHXH7 MH 7" EHD FASTENER (#15) 500/CTN Plastic Pail 500 33
08MHXH8 MH 8" EHD FASTENER (#15) 500/CTN Plastic Pail 500 38
08MHXH92 MH 9" EHD FASTENER (#15) 250/CTN Plastic Pail 250 21

Videos