Skip to content
EPDM Pre-Cut Inside/Outside Corners

EPDM Pre-Cut Inside/Outside Corners

Ideal for installing inside and outside corners. Consists of .060 inch (1.5-mm) thick uncured EPDM flashing material laminated to cured butyl rubber tape and rolled onto a poly release liner providing .090 mils (2.25-mm) of total thickness. This product requires the use of Tape Primer or Low-VOC Tape Primer.

System

EPDM
TPO
M&R
  • Pre-cut 7" by 9" uncured flashing tape
  • Can be used as inside corner, outside corner, t-patch or blowout patch
  • 60 Mil thickness
  • Must be installed with Tape Primer and Lap Sealant or Universal Singly-ply Sealant
  • Available in black or white
  • White can be used on TPO products
  • Meets  ICC-ES Standards

Documents

PDS EPDM Systems Pre-Cut Inside - Outside Corners - black
PDS Pre-Cut Inside Outside Corners and T- Patches-White
SDS - Statement for Article Products

Maintenance & Repair Brochure
Single-Ply Roofing Accessories Guide

Details

2-PIECE INSIDE CORNER WALL FLASHING FOR EPDM
EPDM OUTSIDE CORNER - ONE PIECE WRAP
EPDM OUTSIDE CORNER - TWO PIECE
INSIDE CORNER WITH CONTINUOUS EPDM WALL FLASHING - 90 MIL EPDM
INSIDE CORNER WITH SEPARATE EPDM WALL FLASHING - 90 MIL EPDM
OUTSIDE CORNER WITH UNCURED FLASHING TAPE - 90 MIL EPDM

CURB FLASHING - 90 MIL EPDM
MULTIPLE PENETRATIONS CURB DETAIL - 90 MIL EPDM
PARAPET/CURB WITH SEPARATE EPDM MEMBRANE - 90 MIL EPDM

INTERMITTENT WALL SCUPPER FOR EPDM

PERIMETER ENHANCEMENT FULL SHEET WITH 9 inch RMS FOR EPDM
PERIMETER SHEET ATTACHMENT FOR EPDM

EDGE TERMINATION BAR WITH COVER FOR EPDM

END LAP AND T-JOINT DETAIL FOR EPDM
MEMBRANE SPLICE WITH IN-SEAM TAPE - 90 MIL
WALL FLASHING WITH CONTINUOUS MEMBRANE - 90 MIL EPDM

Options

Item ID Description Packaging Qty per Ctn Weight per Ctn Cover Rate
08MHCPSWH2 MH PRE-CUT INSIDE/OUTSIDE CRNR WHT 20/C Box 20 8
08MHPCC20 MH PRE-CUT INSIDE/OUTSIDE CRNR BLK 20/CT Box 20 5
08MHCPSG2 MH PRE-CUT INSIDE/OUTSIDE CRNR GRAY 20/CT Box 12 0