Skip to content
PVC KEE HP

PVC KEE HP

Is used in mechanically attached and fully adhered roofing systems in new construction, reroofing and recover (retrofit) applications. It may also be used as flexible membrane flashings for walls, curbs, etc, when installing PVC KEE HP Membrane roofing systems. The system must be installed over acceptable roof insulation or other suitable substrate. See the Mule-Hide PVC Specifications Manual for complete specifications and details.

System

PVC
  • Polyester-reinforced
  • Available in 5' and 10' widths
  • 50, 60 and 80 mil thickness
  • Fully adhered and mechanically attached systems
  • Available in white, gray and tan
  • Most often installed as fully adhered
  • Up to a 30 year system warranty available
  • CAN NOT BE installed with Hydrobond as a wet lay-in
  • Pre-printed with lap lines and fastener spacing
  • All PVC accessories can be used on standard or KEE HP membrane
  • Improved chemical resistance over standard PVC, best solution for food service industry
  • More flexible and easier to work with than TPO
  • Will smoke when welding
  • Meets UL Standards
  • Meets C-UL Standards
  • Meets FM Standards
  • Meets CCMC Standards
  • Meets Miami-Dade-County Standards
  • Meets Florida-Building Standards
  • Meets CRRC Standards
  • Meets CA-Title-24 Standards
  • Meets ICC-ES Standards

Documents

PDS Low-VOC PVC Step 1 Activator
View
PDS Low-VOC PVC Step 2 Primer
View
PDS PVC Overlayment Strip
View
PDS PVC Pressure-Sensitive Cover Strip
View
PDS PVC Step 2 Primer
View
PDS PVC Systems KEE HP Membrane
View
SDS - Statement for Article Products
View
SDS Low-VOC PVC Step 1 Activator
View
SDS Low-VOC PVC Step 2 Primer
View
SDS PVC Step 2 Primer
View

CCMC - Canadian Construction Materials Centre evaluation for PVC Systems
View
Florida Product Approval - HVHZ - PVC Systems
View
Florida Product Approval - PVC Systems
View
ICC-ESR Report - Adhered and Mech. Attached EPDM Systems, TPO Systems & PVC Systems
View
Miami-Dade NOA - PVC Systems over Cementitious Wood Fiber Decks
View
Miami-Dade NOA - PVC Systems over Concrete Decks
View
Miami-Dade NOA - PVC Systems over Poured Gypsum Decks
View
Miami-Dade NOA - PVC Systems over Recover Decks
View
Miami-Dade NOA - PVC Systems over Steel Decks
View
Miami-Dade NOA - PVC Systems over Wood Decks
View
TDI - Texas Department of Insurance - TPO Systems & PVC Systems MA over wood
View
UL - Impact resistance ratings for PVC Systems
View
UL - Overview of UL Listings for PVC Systems
View

Hail Coverage - Procedures and Requirements
View
Letter of Compliance Application- Photovoltaic Installation on Mule-Hide Warranted Roof
View
Procedure for Inclusion of Photovoltaic Anchor Flashings
View
PVC Cross Reference Chart
View
PVC Metal Retrofit
View
PVC Pocket Guide
View
PVC Pocket Guide (Spanish)
View
PVC Systems Contractor Brochure
View
Sell Sheet - Why Choose PVC
View
Single-Ply Roofing Accessories Guide
View
Talking Points - PVC Comparison
View
Talking Points - PVC Roofing Systems
View
Tech Bulletin - Pactiv GreenGuard Insulation
View

Design Enhancements - Single-Ply Membranes
View
Design Summary - PVC Fleece Back Systems 10 or 15 year Fully Adhered
View
Design Summary - PVC Systems 10 or 15 year Fully Adhered
View
Design Summary - PVC Systems 10 or 15 year Mechanically Attached
View
Warranty - Notice of Completion
View
Warranty Program Information - Heat Weld Systems
View

Details

BASE ATTACHMENT PVC - ALL-PURPOSE BAR
PARAPET FLASHING FOR PVC
Rhinobond Base Attachment

FIELD FABRICATED INSIDE CORNER FOR PVC
FIELD FABRICATED OUTSIDE CORNER FOR PVC
INSIDE CORNER WITH COATED METAL WALL FLASHING FOR PVC
PRE-MOLDED INSIDE CORNER FLASHING FOR PVC
PRE-MOLDED OUTSIDE CORNER FOR PVC
PRE-MOLDED OUTSIDE CORNER ON COATED METAL WALL FLASHING FOR PVC

CURB FLASHING FOR PVC
PVC COATED GRAVEL STOP FOR FLEECE BACK
PVC COATED WALL FLASHING

MECHANICALLY FASTENED TARGET ROOF DRAIN FOR PVC
PREMANUFACTURED CONDUCTOR HEAD
ROOF DRAIN - SUMPS SLOPED MORE THAN 3 inch PER FOOT FOR PVC
ROOF DRAIN - SUMPS SLOPED MORE THAN 3" PER FOOT - 1 OF 2
ROOF DRAIN - SUMPS SLOPED MORE THAN 3" PER FOOT - 2 OF 2
ROOF DRAIN FOR DRAIN SUMPS SLOPED LESS THAN 3 inch PER FOOT FOR PVC
ROOF DRAIN FOR DRAIN SUMPS SLOPED MORE THAN 3 inch PER FOOT FOR PVC

EXPANSION JOINT - DECK TO DECK
EXPANSION JOINT - DECK TO DECK FOR PVC
EXPANSION JOINT AT JUNCTION OF DECK AND WALL
EXPANSION JOINT AT JUNCTION OF DECK AND WALL FOR PVC

CONCRETE PAVER WALKWAY
MH-100 PVC Walkway

2 inch OR THICKER INSULATION ATTACHMENT - 8 FASTENERS PER 4ft X 8ft BOARD
Extruded Polystyrene Insulation Attachment Fastening Patterns
FM - 12 FIELD FASTENERS PER 4ft X 8ft BOARD PATTERN LAYOUT
FM - 16 FIELD FASTENERS PER 4ft X 8ft BOARD PATTERN LAYOUT
FM - 17 FIELD FASTENERS PER 4ft X 8ft BOARD PATTERN LAYOUT
FM - 6 Field Fasteners per 4'x8' Board
FM - 8 FIELD FASTENERS PER 4ft X 8ft BOARD PATTERN LAYOUT
HELIX MAX FOAM ADHESIVE 12" RIBBON PATTERN
HELIX MAX FOAM ADHESIVE 4" RIBBON PATTERN
HELIX MAX FOAM ADHESIVE 6" RIBBON PATTERN
INSULATION ATTACHMENT - 12 FASTENERS PER 4ft X 8ft IN FIELD
INSULATION ATTACHMENT - 16 FASTENERS PER 4ft X 8ft IN FIELD
INSULATION ATTACHMENT - 17 FASTENERS PER 4ft X 8ft IN FIELD
INSULATION ATTACHMENT PATTERNS FOR MECHANICALLY ATTACHED SYSTEMS
Rhinobond Fastening Requirements

FIELD MEMBRANE LAYOUT FOR PVC
MEMBRANE SECUREMENT FOR PVC
PERIMETER ATTACHMENT FOR PVC
ROOF PERIMETER/CORNER CALCULATIONS ELEVATION DIFFERENCE 3ft OR LESS FOR PVC
ROOF PERIMETER/CORNER CALCULATIONS ELEVATION DIFFERENCE GREATER THAN 3ft FOR PVC

FIELD FABRICATED HOT PIPE FOR PVC
FIELD FABRICATED PIPE FLASHING FOR PVC
MEMBRANE COATED METAL PITCH PAN FOR PVC
MOLDED SEALANT POCKET FOR PVC
PREFABRICATED SQUARE TUBING WRAP FOR PVC
PVC PRE-MOLDED PIPE FLASHING
SLEEPER SUPPORT (HEAVY WEIGHT) FOR PVC - OPTION 2
SLEEPER SUPPORT (HEAVY WEIGHT) FOR PVC - OPTION 3
SLEEPER SUPPORT (LIGHT WEIGHT) FOR PVC - OPTION 1

ALL-PURPOSE BAR EDGE TERMINATION FOR PVC
COATED METAL BUTT JOINT FOR PVC
DRIP EDGE FOR ALL PVC SYSTEMS
DRIP EDGE FOR PVC
EDGE TERMINATION - ALL-PURPOSE BAR FOR PVC
GUTTER TERMINATION FOR FLEECE BACK PVC
GUTTER TERMINATION FOR PVC
MEMBRANE COATED GRAVEL STOP FOR PVC
PVC COATED GRAVEL STOP
WOOD NAILER ATTACHMENT FOR PVC

"T" JOINT COVER PATCH .060" (60 MIL) OR THICKER MEMBRANES
LAP CROSS SECTION FOR PVC - OPTION 1
LAP CROSS SECTION FOR PVC - OPTION 2
PLATE AND FASTENER PLACEMENT FOR PVC
SEAM INTERSECTION FOR FLEECE BACK PVC
SEAM INTERSECTION FOR PVC
T-JOINT DETAIL 50 MIL MEMBRANE FOR PVC

CONCRETE PARAPET WALL WITH TERMINATION BAR FOR PVC
COPING STONE FOR PVC
CURB/WALL FLASHING WITH COUNTERFLASHING FOR PVC
METAL CAP TERMINATION FOR PVC
PREMANUFACTURED ARCHED COPING WITH SPLICE PLATE
PREMANUFACTURED METAL EDGE EXTENDER
PREMANUFACTURED REGLET COUNTERFLASHING
SURFACE MOUNTED COUNTERFLASHING FOR PVC
TERMINATION BAR AT CORNER FOR PVC
TERMINATION BAR AT TILT-UP WALL JOINT FOR PVC
TERMINATION BAR FOR PVC
TERMINATION BAR WITH COUNTERFLASHING FOR PVC

COATED METAL TRANSITION TO SHINGLE ROOF FOR PVC
MEMBRANE FLASHING TRANSITION TO SHINGLE ROOF FOR PVC
TIE-IN TO EXISTING SINGLE PLY FOR PVC

RIDGE MEMBRANE ATTACHMENT FOR PVC

Specifications

Specification - PVC / PVC KEE Fully Adhered
View
Specification Supplement - AeroWeb Adhesive
View
Summary Specification - PVC Fleece Back Systems Fully Adhered
View
Summary Specification - PVC Systems Fully Adhered
View

Guide - Equipment needed to install Heat-Welded Membranes
View
Guide - Insulation Guidelines
View
Guide - PVC Systems HydroBOND Installation Guide
View
Guide - PVC Systems Installation Guidelines
View
Guide - Roof Mounted Photovoltaic Installations
View
Single-Ply Insulation Attachment Guidelines
View
Tech Note - Design Wind Speed vs Warranted Wind Speed
View
Tech Note - Sheet Flutter on Mechanically Attached Systems
View

Specification - PVC Systems Mechanically Attached
View
Summary Specification - Induction Welding Attachment Method
View
Summary Specification - PVC Fleece Back Systems Mechanically Attached
View
Summary Specification - PVC Systems Mechanically Attached
View
Summary Specification - PVC Systems metal retrofit attached into purlins
View

Options

Item ID Description Packaging Qty per Ctn Weight per Ctn Cover Rate
07MHPK511G MH PVC KEE HP 50 MIL 10X100' REIN GRY Shrink Wrap 1 313 1000 Sq.Ft/RL
07MHPK511T MH PVC KEE HP 50 MIL 10X100' REIN TAN Shrink Wrap 1 313 1000 Sq.Ft/RL
07MHPK511W MH PVC KEE HP 50 MIL 10X100' REIN WHT Shrink Wrap 1 313 1000 Sq.Ft/RL
07MHPK551G MH PVC KEE HP 50 MIL 5 X100 REIN GRY Shrink Wrap 1 181 500 Sq.Ft/RL
07MHPK551T MH PVC KEE HP 50 MIL 5 X100 REIN TAN Shrink Wrap 1 181 500 Sq.Ft/RL
07MHPK551W MH PVC KEE HP 50 MIL 5 X100 REIN WHT Shrink Wrap 1 181 500 Sq.Ft/RL
07MHPK611G MH PVC KEE HP 60 MIL 10 X 100 REIN GRY Shrink Wrap 1 456 1000 Sq.Ft/RL
07MHPK611T MH PVC KEE HP 60 MIL 10 X 100 REIN TAN Shrink Wrap 1 456 1000 Sq.Ft/RL
07MHPK611W MH PVC KEE HP 60 MIL 10 X 100 REIN WHT Shrink Wrap 1 456 1000 Sq.Ft/RL
07MHPK651G MH PVC KEE HP 60 MIL 5 X 100 REIN GRY Shrink Wrap 1 217 500 Sq.Ft/RL
07MHPK651T MH PVC KEE HP 60 MIL 5 X 100 REIN TAN Shrink Wrap 1 217 500 Sq.Ft/RL
07MHPK651W MH PVC KEE HP 60 MIL 5 X 100 REIN WHT Shrink Wrap 1 217 500 Sq.Ft/RL
07MHPK817G MH PVC KEE HP 80 MIL 10'X75' REIN GRY Shrink Wrap 1 442 750 Sq.Ft/RL
07MHPK817T MH PVC KEE HP 80 MIL 10'X75' REIN TAN Shrink Wrap 1 442 750 Sq.Ft/RL
07MHPK817W MH PVC KEE HP 80 MIL 10'X75' REIN WHT Shrink Wrap 1 442 750 Sq.Ft/RL
07MHPK857G MH PVC KEE HP 80 MIL 5' X75' REIN GRY Shrink Wrap 1 203 375 Sq.Ft/RL
07MHPK857T MH PVC KEE HP 80 MIL 5' X75' REIN TAN Shrink Wrap 1 203 375 Sq.Ft/RL
07MHPK857W MH PVC KEE HP 80 MIL 5' X75' REIN WHT Shrink Wrap 1 203 375 Sq.Ft/RL

Videos

FAQs

To reduce blocking, packs should only be stacked 4-packs up to five high. We have found that when stacked higher, the bottom rolls could crush a bit which could create blocking and a wavy sheet when installed. It is possible that the stacking issue can be heightened over the summer months due to the heat.