Skip to content
Bonding Adhesive

Bonding Adhesive

A high strength solvent-based contact adhesive that allows quick bonding of EPDM membrane and cured flashings to various porous and non-porous substrates. May be used on both horizontal and vertical surfaces. Formulated for application with a 1⁄2" (13 mm) medium nap roller.

System

EPDM
  • Horizontal and vertical surfaces
  • Approved to be applied direct to PoyISO
  • No slope restrictions
  • Years of proven success
  • Cold weather application
  • This product can only be used as a 2-sided contact adhesive
  • For use with EPDM membranes only
  • Meets  UL Standards
  • Meets  C-UL Standards
  • Meets  FM Standards
  • Meets  Miami-Dade-County Standards
  • Meets  Florida-Building Standards
  • Meets  ICC-ES Standards

Documents

PDS EPDM Systems Bonding Adhesive
SDS EPDM Systems Bonding Adhesive

EPDM Systems Contractor Brochure
OTC Regulation Update for Adhesives and Sealants
Single-Ply Roofing Accessories Guide
Tech Bulletin - Cold Weather Installation

Details

PARAPET/CURB FLASHING A-P BAR HORIZONTAL ATTACHMENT W/6 inch IN-SEAM TAPE
PARAPET/CURB FLASHING A-P BAR HORIZONTAL ATTACHMENT W/ADHESIVE
PARAPET/CURB FLASHING A-P BAR HORIZONTAL ATTACHMENT W/COVER TAPE
PARAPET/CURB FLASHING A-P BAR VERTICAL ATTACHMENT W/3 inch IN-SEAM TAPE
PARAPET/CURB FLASHING A-P BAR VERTICAL ATTACHMENT W/6 inch IN-SEAM TAPE
PARAPET/CURB FLASHING A-P BAR VERTICAL ATTACHMENT W/ADHESIVE
PARAPET/CURB FLASHING A-P BAR VERTICAL ATTACHMENT W/COVER TAPE
PARAPET/CURB FLASHING BAR HORIZONTAL ATTACHMENT W/3 inch IN-SEAM TAPE
PARAPET/CURB FLASHING RMS W/TAPE - HORIZONTAL
PARAPET/CURB FLASHING RMS W/TAPE - HORIZONTAL
PARAPET/CURB FLASHING RMS W/TAPE - VERTICAL
PARAPET/CURB FLASHING W/2.4 inch SEAM PLATES - HORIZONTAL - ADHESIVE
PARAPET/CURB FLASHING W/2.4 inch SEAM PLATES - HORIZONTAL - W/3 inch IN-SEAM TAPE
PARAPET/CURB FLASHING W/2.4 inch SEAM PLATES - HORIZONTAL - W/6 inch IN-SEAM TAPE
PARAPET/CURB FLASHING W/2.4 inch SEAM PLATES - HORIZONTAL - W/COVER TAPE
PARAPET/CURB W/2.4 inch SEAM PLATES / VERTICAL ATTACHMENT W/3 inch IN-SEAM TAPE
PARAPET/CURB W/2.4 inch SEAM PLATES / VERTICAL ATTACHMENT W/6 inch IN-SEAM TAPE
PARAPET/CURB W/2.4 inch SEAM PLATES / VERTICAL ATTACHMENT W/ADHESIVE
PARAPET/CURB W/2.4 inch SEAM PLATES / VERTICAL ATTACHMENT W/COVER TAPE

INSIDE CORNER WITH CONTINUOUS EPDM WALL FLASHING - 90 MIL EPDM
INSIDE CORNER WITH SEPARATE EPDM WALL FLASHING - 90 MIL EPDM
OUTSIDE CORNER WITH UNCURED FLASHING TAPE - 90 MIL EPDM

CURB FLASHING - 90 MIL EPDM
MULTIPLE PENETRATIONS CURB DETAIL - 90 MIL EPDM
PARAPET/CURB WITH SEPARATE EPDM MEMBRANE - 90 MIL EPDM
SLEEPER FOR EPDM
Wall Flashing With All-Purpose Bar
WELDED CURB FLASHING
WELDED CURB FLASHING - ALL PURPOSE BAR TERMINATION FOR EPDM
WELDED CURB FLASHING - AP BAR TERMINATION
WELDED CURB FLASHING - HIGH CURB FOR EPDM
WELDED CURB FLASHING FOR EPDM
WELDED CURB OVER FIELD MEMBRANE WITH CURED OR UNCURED FLASHING TAPE
WELDED CURB OVER FIELD MEMBRANE WITH SEAM TAPE
WELDED CURB OVER FIELD MEMBRANE WITH SEAM TAPE FOR EPDM
WOOD CURB OVER FIELD MEMBARNE WITH SEAM TAPE
WOOD CURB WITH ALL PURPOSE BAR AND SEAM TAPE
WOOD CURB WITH ALL PURPOSE BAR AND SEAM TAPE FOR EPDM

DRAIN INSERT FOR EPDM
ROOF DRAIN FOR EPDM
ROOF DRAIN WITH SUMP FOR EPDM
ROOF DRAIN WITH TAPERED INSULATION FOR EPDM

DECK TO WALL JOINT - A - RMS STRIP - ADHESIVE
EXPANSION JOINT - DECK TO WALL JOINT
EXPANSION JOINT - DECK TO WALL JOINT - A FOR EPDM
EXPANSION JOINT - DECK TO WALL JOINT - C - ADHESIVE FOR EPDM
EXPANSION JOINT - DECK TO WALL JOINT - C - IN-SEAM TAPE FOR EPDM
EXPANSION JOINT - EXISTING FIELD JOINT - A FOR EPDM
EXPANSION JOINT - EXISTING FIELD JOINT - B FOR EPDM
EXPANSION JOINT - EXISTING FIELD JOINT "A"
EXPANSION JOINT - EXISTING FIELD JOINT "B"
EXPANSION JOINT - FIELD JOINT FOR EPDM
EXPANSION JOINT CURB/FIREWALL - ADHESIVE
EXPANSION JOINT CURB/FIREWALL - IN-SEAM TAPE
RAISED MATE-LINE
RAISED MATE-LINE

FIELD FABRICATED HOT PIPE - ADHESIVE FOR EPDM
FIELD FABRICATED HOT STACK - 90 MIL EPDM
FIELD FABRICATED PIPE FLASHING - ADHESIVE
FIELD FABRICATED PIPE SEAL - 90 MIL EPDM
FIELD FABRICATED PITCH PAN - ADHESIVE
FLEXIBLE PENETRATION - 90 MIL EPDM
LIGHTNING ROD - HORIZONTAL ATTACHMENT FOR EPDM
LIGHTNING ROD - VERTICAL ATTACHMENT FOR EPDM
MOLDED PIPE FLASHING WITH TAPE - 90 MIL EPDM
POURABLE SEALER POCKET DOUBLE APPLICATION - 90 MIL EPDM
POURABLE SEALER POCKET FOR EPDM
PRE-FABRICATED METAL PITCH PAN FOR EPDM
PREMOLDED EPDM PIPE BOOT WITH TAPE

ALL PURPOSE BAR TERMINATION - 90 MIL EPDM
ALL PURPOSE BAR TERMINATION for EPDM
DRIP APRON / GUTTER TERMINATION EPDM
DRIP APRON TERMINATION FOR EPDM
DRIP EDGE - 90 MIL EPDM
DRIP EDGE AT MANSARD FOR EPDM
GRAVEL STOP JOINT DETAIL - TPO COATED METAL
GRAVEL STOP TERMINATION FOR EPDM
GRAVEL STOP WITH SCUPPER FOR EPDM
GRAVEL STOP WITH SNAP LOCK FASCIA FOR EPDM
METAL ERA ANCHOR-TITE EDGE DETAIL - 90 MIL EPDM
PREMANUFACTURED 2-PIECE COMPRESSION LARGE EDGE DETAIL FOR EPDM - OPTION 2
SNAP-ON FASCIA FOR TPO

MEMBRANE SPLICE WITH IN-SEAM TAPE - 90 MIL
VERTICAL TERMINATION - 90 MIL EPDM
WALL FLASHING WITH CONTINUOUS MEMBRANE - 90 MIL EPDM

VERTICAL TERMINATION COUNTERFLASHING FOR EPDM
VERTICAL TERMINATION COUNTERFLASHING W/A-P BAR FOR EPDM
VERTICAL TERMINATION METAL COPING FOR EPDM
VERTICAL TERMINATION REGLET FOR EPDM
VERTICAL TERMINATION STONE COPING FOR EPDM
VERTICAL TERMINATION WITH A-P BAR FOR EPDM

EPDM BASE TIE-IN TO SHINGLE ROOF ALL PURPOSE BAR ATTACHMENT FOR EPDM
EPDM BASE TIE-IN TO SHINGLE ROOF W/RMS ATTACHMENT FOR EPDM
EPDM BASE TIE-IN TO SHINGLE ROOF W/RMS ATTACHMENT FOR EPDM - OPTION 2
EPDM TIE-IN TO BUILT-UP ROOF - ADHESIVE
EPDM TIE-IN TO BUILT-UP ROOF - IN-SEAM TAPE
EPDM TIE-IN TO BUILT-UP ROOF - WATERSTOP - ADHESIVE
EPDM TIE-IN TO BUILT-UP ROOF - WATERSTOP - IN-SEAM TAPE

Options

Item ID Description Packaging Qty per Ctn Weight per Ctn Cover Rate
08MHBOND5 MH EPDM BONDING ADH 5 GAL Metal Pail 1 39 60 sq.ft. per gallon

FAQs

This product does not comply with the following Utah counties’ VOC regulations: Box Elder, Cache, Davis, Salt Lake, Tooele, Utah, and Weber. Low VOC Bonding Adhesive is available for use in these areas.